Customization: | Available |
---|---|
Type: | Insulated |
Conductor Type: | Stranded |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Structure:
1.Conductor: annealed bare copper wires, or compact aluminum 8000 series wires, class B.
2.Insulation: Cross-linked Polyethylene (XLPE) Type RW90
Color: Black, white for 2 conductors;Black, red, blue, white for 4 conductors.
3.Bonding conductor: annealed bare copper wires, or compact aluminum 8000 series wires,
class B.
4.Inner Jacket: Flame-retardant and moisture resistant Polyvinyl Chloride (PVC)
5.Armour: Aluminum Interlock Armour (AIA);
6.Outer-jacket:
Low-temperature, moisture and sunlight resistant Polyvinyl Chloride (PVC), black
Application:
Suitable for use in exposed or concealed wiring in dry or wet locations, in
ventilated or ladder type cable trays in dry or wet conditions, on walls or beams, or directly buried.
Suitable for use in hazardous locations: Class I - Groups A, B, C and D, Class II - Groups E, F and G, Class III - All Groups
Standard: CSA C22.2 No. 131, Type TECK90 cable;
CSA C22.2 No. 38, Thermoset insulated wires and cables (Type RW90)
Working temperature: -40ºC to +90ºC
Voltage: 600V, 1000V
TECK 90 Cable for Canada market
Conductor: |
Class B Stranded copper |
Insulation: |
Cross-linked Polyethylene (XLPE) Type RW90 |
Ground wire: |
Bare or stranded copper |
Inner jacket: |
Polyvinyl Chloride (PVC), black |
Armour: |
Aluminum interlocked armor |
Our jacket: |
Polyvinyl Chloride (PVC), black |
Voltage: |
600V 1000V |
Temperature: |
Rated-40°C~90°C |
Standard: |
|
|
CSA Standard C22.2 No. 131 |
|
Application:
For concealed wiring in dry or wet locations For exposed wiring in dry or wet locations
For exposed and wiring in dry, locations where subjected to corrosive action if suitable for corrosive conditions encountered
For exposed wiring where subjected to the weather
For use in ventilated, Non-ventilated and ladder-type cable trays in dry or wet locations
For direct earth burial (with protection as required by inspection authority)
For service entrance above or below ground