APPLICATION: RG-11 Coaxial Cables are suitable for use in RF signal transmission in MATV, CATV and CCTV applications.
CONDUCTORS: RG-11 Coaxial Cable has either a:
• CCS - Copper Clad Steel, per ASTM B800, B869
•BC - Bare Copper Conductor, per ASTM B3, B258
General Specifications
Cable Type |
Series 11 |
Center Conductor Type |
Solid |
Construction Type |
Non-armored |
Jacket Color |
White |
Supported Application |
Video |
Dimensions
Cable Length |
304.8 m | 1000 ft |
Diameter Over Center Conductor, specific |
0.0641 in per 1 strand |
Diameter Over Dielectric |
7.061 mm | 0.278 in |
Diameter Over Inner Shield (Braid) |
7.595 mm | 0.299 in |
Diameter Over Inner Shield (Tape) |
7.214 mm | 0.284 in |
Diameter Over Jacket Tolerance |
±0.008 in |
Diameter Over Jacket, nominal |
9.042 mm | 0.356 in |
Diameter Over Outer Shield (Braid) |
8.204 mm | 0.323 in |
Jacket Thickness |
0.432 mm | 0.017 in |
Jacket Thickness, minimum spot |
0.305 mm | 0.012 in |
Center Conductor Gauge |
14 AWG |
Inner Shield (Braid) Gauge |
36 AWG |
Outer Shield (Braid) Gauge |
34 AWG |
Electrical Specifications
Capacitance |
52.493 pF/m | 16 pF/ft |
Characteristic Impedance |
75 ohm |
Characteristic Impedance Tolerance |
±3 ohm |
Conductor dc Resistance |
11 ohms/kft | 36.089 ohms/km |
Dielectric Strength, conductor to shield |
4000 Vdc |
Jacket Spark Test Voltage |
2500 Vac |
Nominal Velocity of Propagation (NVP) |
86 % |
Shield dc Resistance |
1.7 ohms/kft | 5.577 ohms/km |
Structural Return Loss |
15 dB @ 1000-3000 MHz | 20 dB @ 5-1000 MHz |
Structural Return Loss Test Method |
100% Swept Tested |
Material Specifications
Center Conductor Material |
Bare copper |
Dielectric Material |
Foam FEP |
Jacket Material |
PVC |
Inner Shield (Braid) Coverage |
60 % |
Inner Shield (Braid) Material |
Aluminum |
Inner Shield (Tape) Material |
Aluminum/Poly |
Outer Shield (Braid) Coverage |
40 % |
Outer Shield (Braid) Material |
Aluminum |
Outer Shield (Tape) Material |
Aluminum/Poly, non-bonded |